Drink Rings, Begone! – DIY Wallpaper Coasters
Drink rings shall no longer be regular visitors in our household, for I’ve finally made us some coasters. (And the crowd goes wild.)
There are a million and one great tutorials on how to do this project, such as ones by Prudent Baby, The Cottage Home, and Two Girls Being Crafty. And believe me, I wanted to just post photos of the finished product and direct you to the tutorials, but then I kept thinking of tips and things I wanted to add…and I guess it’s the teacher in me, but I just had to make my own tutorial. So, here you have it: how to make your own wallpaper coasters.
SUPPLIES:
- Wallpaper samples, scrapbook paper, tissue paper, wrapping paper, stationery…any fun paper will do! Just be wary of using any paper from an ink jet printer that might bleed.
- Stone tiles. You can pick them up at Home Depot; they start as low as 16 cents each.
- Mod Podge – glossy. I recently threw out my old bottle of M.P. because I had originally bought it when I was in middle school…we’re talking many many moons ago. So, I picked up a new 16 oz bottle of gloss-lustre podge for $7.99 at Hobby Lobby. I expect it to last me at least a decade. {B.t.w. I think the people who started Hobby Lobby also invented the name Mod Podge. But it’s just a hunch.}
- Felt or cork board. Enough to cover the bases of your tiles.
- Water-resistant glue like the Amazing E-6000.
- Water-resistant clear acrylic spray or shellac finish & sealer. This costs around $5 at can be picked up at most craft and hardware stores.
- Other sundries you’ll want: ruler, scissors, pencil, index card, foam brush…hot drink of choice.
1. Gather your supplies! So, I found out that you can request free wallpaper samples from Anthropologie.com, and with wallpaper being my medium of choice in the original Thinking Closet, I knew I needed to get my hands on some. The samples are 4″ x 6″, however over an inch of the length is glued to a piece of cardstock, so I knew I only had about a square to work with…perfect for square coasters! The prints are so unique and pretty in Anthropologie-fashion, and I was able to cluster my samples into two stacks of 8 according to color; one set for us, and one set for a gift. If you look closely, you can see I incorporated two of my free samples from Farrow & Ball into the second theme, as I had them on hand, and they fit better than some of the other Anthropologie samples. (Farrow & Ball will send you 8.25″ x 11.75″ sheets of 5 different wallpapers free of charge. How very nice!)
In terms of tiles, I had Mark pick up some for me at Home Depot. We opted for MS International stone tiles in Ivory Travertine. They measure 4″ x 4″ and cost $5.49 for a box of 9, which is about 60 cents a tile (you can go even cheaper, but Mark really liked the texture on these).
2. Prep your paper. I created a 3.75″ x 3.75″ square stencil using an index card, so that I wouldn’t have to measure and re-measure each one. These dimensions seemed to work well with my 4″ x 4″ stone tiles, allowing for a thin rim around the edges.
3. Mod Podge Time! After cutting out all of my wallpaper samples, I rinsed off my tiles in the sink to remove their dusty residue; I gave them about 20 minutes to dry before going all Mod Podge on them! Using a sponge brush, I adhered the paper to the tile using a thin and even layer of Mod Podge on the tile. It dries pretty quickly, so you want to make sure you’ve centered it right, then press it flat with your fingers. Don’t try removing it to re-set it; you’ve got to just commit when it comes to Mod Podge or you’ll ruin your paper in the process. To avoid puckering, really press that paper flat and keep coming back to it to check on it. I found that there were a few I had to continually press and re-press to get them to lay flat…and some air bubbles will just be stubborn and become part of the project. Embrace them. They add “character” to your coasters. Once your paper is lying flat and seems secure (after at least 20 minutes), then start your first layer on the surface. It will look white (as you can see in the picture below), but I promise, it dries glossy clear. You will, however, see the texture of your brush-strokes, so definitely brush in one direction. Let your Mod Podge dry for at least 20 minutes before adding the the next coat…and then the next one…and the next one…until you’ve got at least 5 coats on there. This can be time-consuming…but surprisingly, very therapeutic.
4. Seal it! Then, I sprayed the surface with clear Bulls Eye Shallac, which is a finish and sealer for crafts. Any waterproof acrylic sealer would be great. Read the instructions on your can for specifics. This step will help make your coasters waterproof; however, know that Mod Podge takes about a month to fully cure, so avoid putting hot drinks on them until then. And expect the surface to be a bit sticky.
5. Adhere your felt to the base of the coasters. The last step is to add a layer of cushion to the bottom of your tile using either felt or cork-board. Felt is definitely the cost-effective method, and I had some on hand leftover from my felt flower wreath. You can cut four circles for the four corners or one square for the entire bottom as I did. The square stencil from step 2 comes in handy here. I had on hand the very powerful E-6000 glue, which I purchased for repairing jewelry. It’s great because it’s waterproof and extremely strong; however, I’m sure most craft-glues would suffice. If you use E-6000, do it outside or in a well-ventilated area. That stuff is serious.
Flip ’em over, and you’re done! Your coasters are ready to defend the integrity of table-tops everywhere.
Just doing my part to make this a drink-ring free nation…one wallpaper coaster at a time. Hope this is helpful for when you tackle your own.
I’ll be linking up here.
Hi, I stumbled across this posting and thought it would be a fun project… I let the coasters dry/cure for a couple weeks and then stacked them up so they wouldn’t take up so much space. A couple days later I checked on them and they were COMPLETELY stuck together. When I pried them apart, the cork I had glued to the bottoms got ripped off, and the wallpaper squares got destroyed even though covered with Modge Podge and Shellac. So sad. Was I supposed to let them sit out without stacking for the whole month until the shellac cured? Your article just said not to put hot drinks on them, I didn’t realize that meant I couldn’t do anything with them at all for a month.
Not blaming or anything, I’m just genuinely curious if that’s what I was supposed to do. Maybe I’ll try again later.
Oh no! I’m so sorry to hear that! Mine have never stuck together when stacked (and I did not wait a whole month before stacking). Hmmm…I wonder if we used slightly different products? Or if temperature / humidity is an issue? I wish I knew what went wrong or how to fix it. That was a lot of time spent. So sad indeed. 🙁
Hi,
When you have added the layers of Mod Podge, should you wait the month for curing before adding the acrylic sealer?
I want to make and sell sets so I don’t want them to be tacky and for hot cups to stick to them.
I didn’t wait that long to seal them – – just waited a month for hot drinks – – but you might try it to be safe! Also, ours have a teensy bit of tackiness to them, but not enough that cups stick to them. The bigger problem, I have found, is that when condensation from a cool glass creates a small puddle of water on the coaster, sometimes the coaster will stick to the glass when you lift it. But I can’t think of a way to workaround that unless you did cork coasters.
Thanks. I’m unsure what sealer to use as there seems to be mixed reviews about them all! Had been going to get clear acrylic sealer from craft section but many comments on various sites suggest hot cups stick. Was then considering the clear engine paint but looked at a tin that suggests that only cures as the engine warms up and a hot cup isn’t going to reach the same temperature!
This looks really fun! Quick question: how long does the clear finish spray stay sticky? Does it go away eventually? Thanks!
Hmmm…it shouldn’t stay tacky after 24 hours unless it was sprayed on too heavily. Did you have that issue?
Thank you so much for these instructions. I saw these several weeks ago and wanted a refresher on how to do it before starting my own.
You’re so welcome, Deloris! Best of luck on your own.
I was wondering if cans leave rings on your coasters? I have been trying to make coasters myself but every time I think I am finished I put a can on the coaster to make sure that it doesn’t leave a ring but every single coaster has failed. I have used 5 or 6 different products without any success. Is there a solution to this or am I going to have to become accustomed to rings on my coasters?
Cute! Great tip about the Anthro wallpaper samples! 🙂
http://cafecraftea.blogspot.com/
Thanks, Vanessa! And yes, getting anything free from Anthro is somewhat mind-blowing, isn’t it? Enjoy your samples! Do let me know if you create anything with them. I’d love to see what you do!
Awesome tutorial, thanks for sharing!
You’re so welcome, Carolina! Hope you have fun making your own!
Love your tutorial. My Farrow & Ball samples just came in. I wanted to know though can this be done with smooth glossy tiles or should I stick with the stone? Hoping to get this done over the weekend 🙂
Thanks
That’s a good question, Tricia. I don’t see why it couldn’t be done with smooth glossy tiles…but I haven’t tried it myself. Let me know how it turns out if you give it a go. 🙂
Wow! They look amazing! I will try to gather some materials this week and i’ll try this. 🙂 I hope i’ll do it perfectly. 🙂
We’re lovin’ ours and use them every day! And don’t worry too much about perfection…there will sure to be air bubbles (Mod Podge can be tricky for the first few coats), but thankfully, if you have a busy enough pattern, it’ll blend right in. Have fun!
Lauren, I missed this amazing post until your latest about page revamp directed me here. These coasters are fabulous! I may just have to make a few; I’m thinking teachers’ gifts. My kids’ poor unsuspecting teachers…the recipients of many a homemade gift. We’re only a little over halfway through the year and every time we give them a gift they smile and say “You made this didn’t you?” But I digress as I am prone to do.
Thanks for the tidbit of info that we can request free wallpaper samples. I’m on it!
I just love the fact that you give your kids’ teachers gifts throughout the year. Maybe that’s more typical in those early years of education but I had a couple roll in at Christmas and the end of the year…but rarely handmade. What a treat!
And I bet the coasters would be a great gift for them – – in clusters of four, tied with a pretty ribbon perhaps? We still use ours (my drink is sitting on it right now). I’ll just re-emphasize the importance of letting the mod podge cure for about 1 month (at least) after you make them. Otherwise, they’ll have that tacky feeling and hot drinks might make a mark. So, you might want to make your end of school year gifts now! 😉
Thanks for the tip on “curing”. I must have missed that originally as I read this post late at night. Guess I better get going!
Drink rings has been one of my problems ever since because my husband and my dad used to drink in our veranda and the rings will leave its mark. It is so hard to get sometimes it stays there forever. This is a good solution. Let the Drink-Rings be gone. Thanks for sharing this.
I knew I wasn’t alone in my drink-ring plight! We went so long without coasters that we developed bad habits of putting our drinks directly onto our glass coffee table…even when the coaster is RIGHT there now. Sheesh! Still room to grow, I suppose. 😉
Such a great project – what a great gift this would be. Thank you for sharing at MightyCrafty Mondays!
Many thanks, Lissa! I appreciate you stopping by.
These look so, so cool. Love them!
Thanks, dearie! That means a lot from the art club queen!
You’re too funny!
I absolutely LOVE theese and I have been wanting to make them since forever, I love coasters!!! Do I have to use wallpaper or any kind of paper is fine? which is the best alternative to wallpaper? LOVE THEM!!
Any kind of paper is fine! I have even seen people use tissue paper, so thickness should not be an issue! The Mod Podge will react differently with different paper – – so just do a tester one first to see the best technique. Photos printed on paper would also create great coasters, I think. Let me know what you end up using! I’d love to see them.
Thank you so much!! and do you know any alternative to mod podge? I live in South America and I can’t seem to find it. 🙁
Your question intrigued me, so I did some internet searching. Here’s what I found: a great post that suggests watering down Elmer’s Glue All. I also read that gel medium in semi-gloss or satin finish is a great alternative if you can your hands on that at an art supply store. It is also sold on Amazon.com. Best of luck, Carmen!
thank you so much! that helped me a lot!! 🙂 I’ll start right away, I’ll send pictures! 🙂
There adorable! 🙂 I would love to try this out. I also hate those ring marks leaving on the table – I am so in to your Drink – Ring – Free Campaign!!! 🙂
I appreciate you standing behind us as we forge ahead, striving to make a difference for table-tops everywhere. 🙂
Very cool, I love how they turned out! I did something similar last Christmas as a gift for my mom; she has these cocktail napkins that she loves, so I turned a few of them into coasters for her. 🙂
Thanks for sharing at The Fun In Functional!
Jessi, that’s so sweet of you! I love that you commemorated something that she loves. You’re so creative!
Those tiles look great!
Thanks, Jess! They were fun to work on.
Such a wonderful tutorial. I think there is a box of tiles in my basement waiting for some wallpaper. Another project for after Christmas! Thanks.
Ooo! Sounds fun to me. And how perfect that you already have a box of tiles. Enjoy!
Great tutorial and the coasters will complete their ring free mission in fabulous style! Thanks so much for sharing on Busy Monday!
I appreciate you hosting, Charlene…and for taking the time to stop on by. I don’t know how you link party hostesses do it! 😉
These are so pretty and sound quite simple to make. I have a lot of wallpaper remnants and out of date samples that would be perfect for this.
It’d definitely be a fun project for making gifts this holiday. Have fun!
Oh my goodness, this may be my favorite craft project you’ve done yet! They look so good, Laur. Really professional and artsy and awesome. I think I especially love it because of the amazing anthro designs, plus its something that I’ve been wanting to do/needing lately, so it feels more personal! I won’t forget this post when I get some free time to make my own…hopefully this summer! xo
Oh, that makes me so glad. I’d love to make some more WITH you! Sister summer camp 2013? Perhaps during your visit to Orlando? Yes and yes, please!
Beautiful. I have been wanting to make my own coasters for awhile.
thanks for sharing.
I, too, had coasters on my TO DO list for a very long time…years, in fact. I’m so glad I finally got ’em done!
What a fantastic idea.
I am currently decorating, so will have a go to make some to match the decor:))))
I have sparkly paper, so they should zing!!
Hugs
Ooooo! Sparkly paper makes me swoon. Would love to see a pic of your project when you’re done!
What a fun and budget-friendly craft! Love that it can be personalized for whomever they’re for. Great tutorial!
Glad you liked it, Laurie. Yes, the possibilities are endless with this one…photos, monograms, book pages…the list goes on and on!
These would make great gifts for Christmas. Thanks for posting!
Indeed! In sets of four, all tied up with a pretty ribbon!
This is such a clever idea! I’m so glad I found your blog:)
Katie
http://www.funhomethings.com
Thanks, Katie! So happy to have you here!
Gorgeous coasters!!! Thanks for sharing at Submarine Sunday!!!
T’onna @ Navy Wifey Peters Aboard the USS Crafty
T’onna, so sweet of you to stop by. Thank you!
Thanks for sharing at last week’s Submarine Sunday link party! I featured your awesome coasters at this week’s party. I hope you’ll link up again this week, and don’t forget to grab a feature button!
T’onna
http://www.navywifeypeters.blogspot.com/2012/11/submarine-sunday-7.html
Yay! Thanks so much for the feature, T’onna. I’ve always admired your little feature icons, so it’s fun to be one this time around. 😉
Awesome, I love love love your print choices! I’m pinning this!
Gotta love Anthro for their amazing prints! Thanks for the pin love. Have a great weekend!
Yay! What a great use of the wallpaper samples! Love them. 🙂
Thanks, Lauren! You are the reason I got my hands on the samples in the first place, so thanks so much for the tip, girl. B.t.w. your idea books are on my to do list (hopefully before Christmas), so you can bet I’ll be returning to your tutorial for inspiration.
So stylish and pretty! They are little works of art. I am for sure pinning these! -Hopefully they will make it to the completed projects board one day 😉
Yay! I need to start a “completed projects” board…good idea, Robyn.
Love it! Cant wait to try! Also thank you so much for sharing tips on blogging. I’ve started many blogs before and don’t stick to it long term. This time I’m doing it only for myself and then we’ll 🙂
Good for you for re-focusing your energies…. A beloved college professor once said, “When you start with passion, your work will always succeed.”
Thanks, girlie. Gotta credit Anthro with the unique designs.
I love these! So colorful and cool.
Thanks, girlie. Gotta credit Anthro with the unique designs.
Love these! They’re adorable! I definitely need to make myself some coasters…we have yet to get any rings on our tables, but we also don’t have any way of stopping it.
Trust me, those drink rings can show up unexpected. We didn’t think we needed them because we have a glass-top coffee table and a sealed wooden table…but they found a way! 😉 Fun for gifts, too.
I love it!! I so want to make some. Just gotta find some cool wallpaper and tiles now.. 😉 I’m a new follower, found you via a linky party over at Sew Many Ways!
They’re really fun and turned out better than I expected. I actually think the colors came out brighter with the modge podge than before! Thanks for the follow, Samantha.
What a great project that I can individualize for gifts and I love your tutorial with photos. Very easy to understand. Hope to join your drink-ring-free campaign! Travertine tiles are very popular right now and everyone wants them!!
Thanks for joining the campaign! We need all the help we can get. (wink.)
Yes, they would be fun to make as gifts…though with all of the layers of modge podge, they are definitely time consuming. So, I would do a big bunch at one time and give them away in clusters of 4 perhaps.
Hadn’t heard of travertine before, but I guess we’ve never shopped for tiles before. Love that you’re up on the tile fads, Mrs. Kitchen Renovation Queen!